• 1655 E. Oakland Park Blvd., Oakland Park, FL
  • 24/7 Emergency Service Available
Contact us day or night!


What is Rough In Plumbing?

What is Rough In Plumbing?

When it comes to home building and remodeling, there are plenty of instances where you’ll need to work with plumbing. Whether it’s adding a sink or creating an entire plumbing system for your home, you’ll experience the concept of rough in plumbing.

In this article, you’ll learn all about the concept, including what’s often included in the process and how it fits into obtaining the necessary building permits. Plus, you’ll learn how to find a reliable plumber to help with the rough in in South Florida.

What is Rough-In Plumbing?

What is rough in plumbing?

Rough-in plumbing is the construction stage that follows basic framing. Water supply and drain pipes are run through bored holes in the studs, though fixtures have not yet been installed.

The term “rough-in” can actually be used to include many of the aspects of construction that happens right before an inspector is brought in. Types of rough-in can include electrical, plumbing, cable, and even home automation.

The framing has already been completed. However, the rough-in plumbing stage is where all of the installations are laid so that the walls and ceilings can be closed up. A building inspector will usually come in once the rough-in has been completed before the drywall is added. This makes it easier for a building inspector to see everything – and ensure that modifications can be done with ease.

Why is Rough In Plumbing Important?

Rough-in plumbing is vital to the permit and inspection process. Most building inspectors won’t provide the necessary approval if the walls and ceilings have already gone up.

In most instances, the rough-in remains standard from home to home. The only thing that may vary is the overall placement of certain pipes and drain lines based on where certain fixtures will go.

All of the critical components of plumbing are included in the rough-in stage. Only after that will the finished plumbing be done. When the finished plumbing happens, the homeowner can choose the various fixtures – sinks, faucets, toilets, etc. The personalization happens during the finishing stage, not during the roughing stage.

3 Examples of What’s Included in Rough In Plumbing

The rough in stage.

The rough in stage of plumbing includes a variety of projects.

Routing of pipes. All of the pipes will need to be routed through wall cavities, often through bores in the studs.

Running vent stacks. The vents will need to be run to the roof to help with ventilation and moisture relief.

Connection of lines. The drain lines and water lines will need to be connected to the sewer, septic, or well lines that are in place based on the property and city code.

The amount of rough-in plumbing that actually has to be done will vary by project and the extent of what other contractors may do. Some plumbers will have to excavate and lay underground pipes, while others may get on-site once that aspect has already been covered.

What to Expect with Rough In Plumbing

Licensed, experienced plumbers should be the only contractors you work with when you require rough-in plumbing. Water damage due to faulty plumbing can be costly – so it’s best to avoid that from the very beginning.

Whether you are a homeowner or a business owner, the rough in process will involve quite a few decisions from you.

  • You’ll have input over where you want certain pipes to be located. As such, you can look at the path of the pipes on the framing materials before it’s all enclosed
  • You can choose from various pipe materials, including copper, plastic ABS, or cast-iron

Plumbers can make recommendations to you to ensure that you choose wisely based on your overall vision. Additionally, plumbers need to install everything properly, seal open pipes, and test the system comprehensively for leaks.

Experienced plumbers will be working with hand tools and power tools, so it will be a loud process. Typically, during remodels, you’ll want to consider temporarily relocating until the work is done.

Once all rough-in work has been done, inspectors will approve or fail the work that has been done. If the work is approved, drywallers will come in next. If the work fails, plumbers will need to redo some of what has been done to ensure that it passes inspection. This is where it is critical to work with professionals – you don’t want to spend any longer in the rough-in process than necessary due to faulty work. Often, it costs each time an inspector has to come out, driving up the project’s overall cost.

After the drywall is up, plumbers will come in for a second round to install all fixtures. An inspector makes a second visit and approves the building permit.

Explore Rough In Plumbing in South Florida

Virtually any major construction project or plumbing renovation will require rough-in. This is not a DIY kind of task, so you’ll need to rely heavily on a professional plumbing company’s expertise.

The rough-in process is often done in conjunction with other contractors. As such, it’s critical to work with a plumber who understands the various demands of obtaining a building permit and getting it approved. 

At Echo Air Conditioning, we have experience with all aspects of rough-in plumbing, from running water supply lines to drain pipes.

When you’re in South Florida, you can depend on us. We’ve worked with residential and commercial customers alike throughout Broward County and Southern Palm Beach County. Contact us today to learn about the comprehensive plumbing services that we can help with.

Add Your Comment

Your email address will not be published.*

This site uses Akismet to reduce spam. Learn how your comment data is processed.